Hydraulic Press Such a device, in the process of practical use, some time may be due to our operation problems due to some other problems, resulting in the failure of the entire device, then in this situation, most people Want to know what is the reason?

right now Hydraulic Press Failure may result in the jam of the entire valve core. For example, if the original valve port is blocked, this situation is present. When the valve hole of the flow valve or the directional valve is blocked, the entire hydraulic machine is very easy to show these operational failures. Phenomenon, in this situation, the oil pollution of the hydraulic press should also be checked, check the dirt inside, or some other gelatinous substance deposits, and check if they have stuck the entire valve hole. In the same way, you should also check the wear condition of the entire hydraulic valve.

Hydraulic Press There are some malfunctions, or it may be the blockage formed by the piston cap inside during the process of moving back and forth, no matter how you operate it, Hydraulic Press No action will be taken. Of course, at this time, it is recommended to check whether the sealing conditions of these piston rods are particularly tight, whether they can enter the stolen goods and gelatinous substances, and whether the axis of the piston rod and the entire steel cylinder is right. Are they centered, or are their wearing parts invalid? Hydraulic Press The control pressure of the hydraulic system is relatively low. Generally speaking, you should check the pressure source at this time to make sure that all the pressure regulation systems are within a regular scale, because only in this way can their pressure be ensured. Will not suffer any interference.