Hydraulic Press It is a machine that uses static pressure to process metal, plastic, rubber, wood, powder and other products. Commonly used in casting, stamping, cold extrusion, straightening, bending, flanging, deep drawing, powder metallurgy, stamping and other stamping processes and forming processes. Whether it is assembling or disassembling the hydraulic components of the hydraulic press, pollution must be avoided. Therefore, the hydraulic press must be cleaned before installation and use, so that it can be cleaned correctly and effectively. Here we have summarized several Hydraulic Press Cleaning method.

1. Clean on a clean workbench, Hydraulic Press The disassembled and cleaned hydraulic components should be placed in a container with a lid, and a certain amount of hydraulic oil should be injected into it. It is forbidden to put it directly on the floor, bench or other places. The hydraulic components of the hydraulic machine should be cleaned with kerosene or gasoline, and Hydraulic oil of the same grade as the oil used for hydraulic system operation.

2.Hydraulic Press After cleaning the hydraulic components, do not use cotton, linen, silk or chemical fiber materials to scrub the system to avoid the fallen fiber contaminating the system; because there are dust particles inside the leather tiger, it is also prohibited to use the leather tiger to drum up the parts. Wind, the editor advocates that we use clean and dry compressed air to dry the parts.

3. If the cleaned hydraulic components are not in a hurry for installation, they can be stored in anti-rust oil. If they are in a humid place in the south, they should be treated with anti-rust.

4. Because some hydraulic components are precision parts, it is best to disassemble and clean the hydraulic press in a clean room. If there are special requirements, or if the conditions are good, it is best to press, so that the indoor pressure is greater than the outdoor, and to avoid atmospheric dust pollution. The conditions are limited and there is no contact. You only need to choose a clean operating system for isolation, and prevent it from being carried out in the open air, utility room or installation room.

5.Hydraulic Press Operators should wear work clothes and work caps with fibers that are not easy to fall, to prevent dust, hair or dandruff and fibers from falling into the hydraulic system from causing artificial pollution. It is forbidden to eat or smoke during the cleaning process.