Y65-800T three-position red punch hydraulic press

The computer optimizes the structure design, the four-column structure is simple, economical and practical; the frame structure has good rigidity, high precision and strong anti-partial load capacity.

Advantages of three-position red punching hydraulic press: 1) forming is basically not limited by the external shape of product parts; 2) production uses common common equipment, which is easy to put into production and suitable for small and medium-sized enterprises. 3) High productivity, suitable for mass production; 4) Due to the core pulling device, the pressed parts are hollow inside, unlike the parts processed by forging dies, which are solid inside, moreover, the burr thickness of the general small red die is about 0.5mm, while the burr thickness of the forged die is generally above 2mm, so the material utilization rate is much higher than that of the forging die. 5) Red punching is a kind of processing with little cutting and no cutting.

Key words:

液压机;四柱液压机;四柱万能液压机;多向锻造液压机;红冲液压机;包装盒压纹液压机

Keyword: Y65-800T three-position red punch hydraulic press

Product Details

Characteristics: the computer to optimize the design of the structure, the machine body can be used for frame type or four pilar type constructionFrame type rod preload structure, high precision, good rigidity, the sideway of foursquare and octahedra, the high orientation precision, the unbalanceloading resistance isDIarconstructionIs simple.economic ana practicaImported material cylinder sealing components, highStrono"tVDereliability, long service life: Movingworkbench, convenient mould replacement; Deep drawing, the blankholder slide can be joined by the positioningpin etc,realize the dynamicof sinale action:achine,electricity iauidinteorationSuch as oil cylinder inferior vena supportingloop, the oil cylinder interlock circuit and so on, the safety is superior; importedis a sensitive and reliable.Conrofollowing areas:All kinds of containers:all kinds ofApplicable fields:This series machine:is suitable for all the deep drawing250PC1ADrocesS.automoble covering parts;household applance parts,kitchen utensils, tractor, motorcycle and aerospace, aviation,electronics, instruments,chemical etc.

欧凯机械

3station red hydraulic press

Advantages:

1) Forming is basically not limited by the external shape of the product parts themselves;
 
2) production using common equipment, easy to put into production, suitable for small and medium-sized enterprises production;
 
3) High productivity, suitable for mass production;
 
4) Due to the use of core pulling device, the pressed parts are hollow inside, unlike the parts processed by forging dies, which are solid inside, and the burr thickness of general small red dies is about 0.5mm, while the burr thickness of forged dies is generally above 2mm, so the material utilization rate is much higher than that of forging dies;
 
5) Red punch is a processing technology with little and no cutting. The surface roughness is close to the mold, and the dimensional accuracy can reach 6-7 levels, so its mechanical cutting amount is very small;
 
6) the mechanical properties of red punching parts are good, because the metal blank after red punching is heated, extruded and cooled, the metal structure changes, eliminating the defects caused by casting or drawing, making the internal crystal structure of the parts linear from inside to outside, improving the mechanical properties of red punching parts;
 
7) After the red punch, the internal grains of the metal have been refined, the density of the metal has been enhanced, and the corrosion resistance of the parts has been improved;
 
8) Suitable for all kinds of colored or black metal processing.

Related Products

online message