Wenzhou Okcan Machinery Co., Ltd

ABOUT OKCAN

Wenzhou Okcan Machinery Co., Ltd

Wenzhou Okcan Machinery Co., Ltd is located in Wenzhou Pingyang Wanquan Industrial Zone, professional commitment to multidirectional forging hydraulic press, the rapid forging hydraulic press, three position red blanking machine, automatic precision red punching hydraulic machine, elbow cold push molding machine, three cold extrusion molding machine, head forming hydraulic machine...

Y41-20T-500T single-column hydraulic press

Single-column hydraulic press series product introduction: The single-column hydraulic press frame is made of high-quality steel plate through finite element analysis and welded by optimized structural design. It is mainly suitable for press-in forming, bending, riveting, assembly and printing work, and is easy to form an assembly line . This machine is suitable for the stretching and forming of thin plates, the pressing and bending of thin plates, the correction and pressing of shaft parts, etc. It is also suitable for the pressing processes of general powder and plastics, especially for household appliances, hardware, aluminum products and other industries. Be applicable.

YD-1000T-3000T Single-action anti-theft door hydraulic press

Introduction of the anti-theft door hydraulic press series: the body adopts two structures, six-column and frame type, with good guiding performance and precision retention. The main oil cylinder adopts double-cylinder or triple-cylinder arrangement, so that the workpiece is evenly stressed. The ejector cylinder, hydraulic cushion and other components can be configured according to user needs. The company produces 800T, 1000T, 1200T, 3000T single-acting hydraulic presses for the embossing and forming of anti-theft doors, and 1200T, 1500T, 2000T, 3000T double-acting hydraulic presses. Produce ejection force embossing, due to blank holder force and ejection force parameters

YG-200-1250T four-column hydraulic press (reducing pipe, pipe cap)

Four-column hydraulic press product introduction: Four-column hydraulic press, also known as hydraulic press, is a machine made by Pascal's law that uses liquid pressure to drive, and there are many types. Of course, the use is also diverse according to needs. For example, according to the type of liquid that transmits pressure, there are two categories: hydraulic press and hydraulic press. The total pressure generated by the hydraulic press is relatively large, and it is often used for forging and stamping. Forging hydraulic press is divided into die forging hydraulic press and free forging hydraulic press. The die forging hydraulic press uses molds, while the free forging hydraulic press does not use molds. The first 10,000-ton hydraulic press manufactured in my country is a free forging hydraulic press. The four-column hydraulic press is composed of two parts: the host and the control mechanism

YTK-100-315T Copper Tee Extrusion Machine Belling Machine

Copper tee extruder flaring machine product introduction: The tee extruder can extrude TP2 copper pipes into T-shaped, claw-shaped, and Y-shaped top-pass equipment. Our factory produces punching, forming and shrinking at the same time. We can also provide users with molds and other copper pipe fittings. We welcome new and old customers to negotiate business.

Y41-20T-500T single-column hydraulic press

Single-column hydraulic press series product introduction: The single-column hydraulic press frame is made of high-quality steel plate through finite element analysis and welded by optimized structural design. It is mainly suitable for press-in forming, bending, riveting, assembly and printing work, and is easy to form an assembly line . This machine is suitable for the stretching and forming of thin plates, the pressing and bending of thin plates, the correction and pressing of shaft parts, etc. It is also suitable for the pressing processes of general powder and plastics, especially for household appliances, hardware, aluminum products and other industries. Be applicable.

OUR ADVANTAGE

Specializing in the production and sales of hydraulic equipment

Quality control system

Oukai machinery implements the quality policy of "win the market competition with science and technology, win the trust of users with superior quality"

After sales service guarantee

To establish a complete service system is the core of Oukai machinery marketing strategy, and constantly improve service efficiency and quality

Technical service and support

Professional service, on-site service, delivery reminder service, installation and debugging service

What are the main applications of die forging hydraulic press?

China's first 40000 ton aviation die forging hydraulic press was successfully tested in Xi'an Yanliang National Aviation high tech Industrial Base on March 31, 2012, and successfully forged large plate products, which solved the design and manufacturing problems of precision die forgings in China, such as large titanium alloy integral frame, beam and large turbine disk. Die forging hydraulic press is mainly used in aviation field. In modern aircraft manufacturing, the proportion of light metals (mainly titanium alloy) is increasing. Only by using more light metals can the performance of aircraft be improved continuously. However, light metals such as titanium require a high unit pressure for deformation. In order to produce light metal die forgings, the working pressure of the press must be increased greatly. In addition to aviation and aerospace industries, other important industrial sectors also need large forgings. For example, the production of large disk forgings for gas turbine, flue gas turbine, various engine blades, large marine die forgings, large power station die forgings, Pressure Vessel Forgings and other types of civil products die forgings can not be separated from large die forging hydraulic press.Die forging hydraulic pressIt plays an important role in aerospace equipment manufacturing industry.

2019-10-18

Wenzhou Okcan Machinery Co., Ltd，Advanced hydraulic machine manufacturer

Wenzhou Okcan Machinery Co., Ltd has developed a high degree of automation of automatic hydraulic machine. The product adopts microcomputer control technology to realize the automation of product from feeding - forming process. The high safety performance of the molding machine adopts automatic production, no one operates, and the accident is eliminated, which provides guarantee for the safety production. Compared with the friction press of the same tonnage, the energy saving and consumption reduction are hydraulic transmission, the motor power is greatly reduced, one person can operate without noise. The machine has high production efficiency, adopts double die pressing technology, and can form 2 bricks at a time. In addition, by adopting the technology of heating the top and bottom plate, the efficiency is greatly improved and the production is fully automatic. The three extrusion cylinder structure can form 90 degree and 135 degree parts, and the speed and pressure of the extrusion cylinder can be adjusted in a certain range. The process is wide in scope and has strong universality. Computer aided design ensures the rigidity and strength of the lower beam. PLC control is used in the electrical system, which can realize two kinds of process actions, constant pressure and fixed process. It can be equipped with pressure boosting device to adapt to the forming of complex and difficult forming parts. It is a typical good molding machine. The hydraulic press is suitable for pressing plastic materials. Such as powder product forming, plastic product forming, cold (hot) pressing metal forming, sheet drawing, cross pressure, bending pressure, turning through, correction and other processes. The machine has independent power mechanism and electrical system, and it can realize three working modes, namely manual, semi-automatic and automatic, by means of centralized control of buttons. The working pressure, pressing speed, no-load fast down and deceleration line and range of the hydraulic press machine can be adjusted according to the process needs. It can complete three technological modes, namely, jacking process, without jacking process and stretching process. Each process is constant pressure, and two kinds of working actions are selected. The constant pressing forming process has the jacking delay and automatic return after pressing. It is an ideal hydraulic press. Wenzhou Oukai Machinery Co., Ltd. is widely used in oil pipeline, nuclear power plant valve, high pressure valve, water heating valve, pressure vessel, construction industry, automobile industry and other fields. As the basic equipment of national industry, Oukai machinery is aiming at contributing to the country, aiming at leading science and technology, improving and providing high-quality service, and cooperating sincerely with friends from all walks of life to jointly revitalize the national industry. Since its establishment, Oukai machinery has always adhered to the enterprise spirit of "quality first, credit first, realistic innovation and sustainable development". Adhering to the "customer demand is our mission", Oukai machinery strives to provide the most high-quality products and the most perfect service for the customers in line with the principle of equal importance of service and quality. The high quality automatic weighing of finished products produced by the molding machine can ensure the product quality stability, uniform distribution and constant pressure by hydraulic transmission. Thus, the size of the fixed products is accurate, the consistency of the body density is good, and the quality of the products is improved. The maintenance cost is low, the structure of the series products is simple, easy to maintain, maintenance, and the vulnerable parts are mainly some sealing elements, so the maintenance cost is very low. At the same time, because of the high stability of hydraulic transmission, the wear of the grinding tool caused by excessive impact of hammer head is avoided. The molding machine has the advantages of high weighing accuracy, accurate feeding, sensitive and reliable operation, convenient use and maintenance, high production efficiency and high automation. The performance of the one column hydraulic press (single arm hydraulic press) is introduced in the hot sale of y41-100t single column hydraulic press: 1. The main body of the single column hydraulic press is C-type structure, which consists of the fuselage, main cylinder and motor. The body is composed of upper beam, slide block, workbench, column, adjusting nut and lock nut. The sliding block is connected with the piston rod of the main cylinder and moves up and down by the guide rail of the body. The body and the working table are welded steel plates. The post welding aging treatment can effectively eliminate the internal stress. 2. The main cylinder of this machine adopts piston structure. The cylinder block and piston rod are made of 45 3. The position of the slide

2019-06-20

The company takes advantage of long holidays for important training

Before 2015, the domestic economy is still developing vigorously, and the demand for hydraulic press from all walks of life is still strong. In the hydraulic press industry, relying on the domestic demand, the domestic economy is still strong, and all walks of life have a strong demand for hydraulic press

2017-12-29

According to Pascal principle, it is used to transfer energy to realize various processes

Hydraulic press is a kind of machine which uses liquid as working medium and is made according to Pascal principle to transfer energy to realize various processes. The hydraulic press is generally composed of the main machine, power system and hydraulic control system. Hydraulic press classification has valve hydraulic press, liquid hydraulic press, engineering hydraulic press.

2017-12-29