PRODUCTS

Wenzhou Okcan Machinery Co., Ltd

current location：

Homepage

Product Center

Pipe forming hydraulic press

HLE Elbow Pipe Fitting Forming Machine

Product List

Products 



HLE-200T-2000T Elbow Mandrel Forming Hydraulic Press

The main performance characteristics of the elbow mandrel forming hydraulic press: 1. The body is a four-column structure, and the stress parts are optimized for design, beautiful in appearance, and economical. 2. The volume of the filling tank is increased to ensure fast filling and reduce the pressure time. Increase the heat dissipation area and reduce the oil temperature. 3. The end face modulus of the three beams of the main engine is relatively large, which improves the stiffness of the three beams and greatly extends the service life. 4. Both the master cylinder and the piston rod are made of high-quality forgings, which improves reliability. 5. The main rod adopts a four-nut structure, which improves the pre-tightening performance and can maintain accuracy and stability for a long time. 6. Piston rod and column surface

YTW-63T-200T Elbow Ball Forming Hydraulic Press

Elbow ball forming hydraulic press product introduction: It is suitable for steel pipe elbow, elbow deformation process, bending, flanging, sheet stretching, etc. This machine has independent power mechanism and electrical system, and adopts button centralized control, which can realize three operation modes: adjustment, manual and semi-automatic. The working pressure, pressing speed, and stroke range of this machine can be adjusted according to process requirements. And it can complete two process modes of constant pressure and constant stroke, the process mode of constant pressure. After pressing, it has the action of holding pressure and delaying automatic return. Optional accessory: photoelectric protection device. Digital display system for stroke, pressure and time.

YW-500T-3000T Four-column Hydraulic Press (Stamping Elbow)

Performance characteristics of the four-column hydraulic press: ★This series of hydraulic presses are universal pressing equipment, suitable for the pressing process of plastic materials. Such as powder product molding, plastic product molding, cold (hot) extrusion metal molding, sheet extension, and stamping, bending, flanging, correction and other processes. ★The machine has an electrical system with an independent power mechanism. It adopts button centralized control, which can realize three working modes: adjustment, manual and semi-automatic; ★The working pressure, pressing speed and slide stroke of the machine can be adjusted according to the process requirements, and It can complete the three process methods of ejecting process, without ejecting process, and stretching process.

Intermediate frequency heating hydraulic elbow pushing machine

Intermediate frequency heating hydraulic elbow pushing machine (1) This equipment has many advantages such as the following: 1. With hydraulic cylinder as the propulsion element, it has powerful power, stepless speed change, easy operation, safe and reliable, and auxiliary rods on both sides are equipped for guiding and positioning. , The precision of formed products is higher. 2. The supporting hydraulic station uses a large-volume oil tank, and the propulsion speed can be adjusted by adjusting the flow rate of the control valve. The hydraulic system adopts integrated oil circuit and electromagnetic overflow technology, which greatly reduces the heat generation of the hydraulic system, reduces energy consumption, and optimizes the entire working environment. The hydraulic system and operation control components all use Wood hydraulic elements